HIGH OUTPUT STATOR (HONDA)

Brand new high output stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Back Plate included
• All products shipped are tested

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications:

Dimensions :
Interior diameter : 34 mm
Exterior diameter : 92 mm
Thickness : 15 mm
Length of wires stator to grommet : 75 mm
Length of wires grommet to plug : 900 mm
Length of pickup coil's wire to grommet : 80 mm

Other specifications :
Number of wires : 8
Number of plugs : 3
Number of pins : 8

Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +/-20%
Alternator : Yellow to Ground = 0.L Pickup : Green to Blue = 250 ohms +/-20%
Source : Black/Red to Blue = 36 ohms +/-20%
Source 2 : Blue to White = 7 ohms +/-20%

Warning:

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.