STATOR (HONDA)

Brand new aftermarket Stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Tow Pick up pulsar coil included
• Connectors included
• Rubber grommet included
• All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Specifications:

Dimensions :
Interior diameter : 32 mm
Exterior diameter : 77 mm
Thickness : 12.7 mm
Length of wires stator to grommet : 70 mm
Length of wires grommet to plug : 500 mm
Length of pickup coil's wire to grommet : 55 mm

Other specifications :
Number of wires : 6
Number of plugs : 1
Number of pins : 6
Number of poles : 12

Wire to wire resistance :
Alternator : White to Yellow = 2.1 ohms +-20%
Pickup #1 : Blue/Yellow to Green/White = 242 ohms +-20%
Pickup #2 : Green to White = 242 ohms +-20%

Warning:

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !