KIT STATOR + VOLTAGE REGULATOR (YAMAHA)

Brand new kit generator Stator + voltage regulator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included

• No assembly required
• The Quality exceeds the OEM equipment
• Improved heat sink and charging capabilities
• Higher grade of electric components.

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Specifications:

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 104 mm
Thickness : 22 mm
Length of wires stator to grommet : 120 mm
Length of wires grommet to plug : 350 mm
Length of pickup coil's wire to grommet : 40 mm

Other specifications :
Number of wires : 5
Number of plugs : 2

Wire to wire resistance :
Alternator : White to White = 0.8 ohms +/-20%
Pickup : Blue to Yellow = 221 ohms +/-20%

Dimensions :
Width : 80 mm
Length : 90 mm
Height: 28 mm
Fixation holes center to center : 70 mm

Other specifications :
Number of plugs : 1
Number of pins : 5

Warning:

Battery condition is extremely important. No stator or voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.