KIT STATOR + IGNITION CONTROLLER COIL (CDI) (POLARIS)

Brand New Kit Stator + Ignition Controller Coil (CDI)

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All shipped products are tested

*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Stator

• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connector included
• Rubber grommet included

Ignition Controller Coil (CDI)

• Our PeakRPM CDI Box provides the optimal output for your ride
• Higher grade of electronic components
• The Quality exceeds the OEM equipment

Specifications:

Stator
Dimensions :
Interior diameter : 40 mm
Exterior diameter : 108 mm
Thickness : 25 mm
Length of wires stator to grommet : 85 mm
Length of wires grommet to plug : 930 mm & 960 mm & 1400 mm
Length of pickup coil's wire to grommet : 160 mm

Other specifications :
Number of wires : 10
Number of plugs : 7
Number of pins : 10

Wire to wire resistance :
Alternator : Yellow to Yellow/Red = 0.4 ohms +/-20%
Alternator : Yellow to Ground = 0.L on display
Pickup : Red to Black = 370 ohms +/-20%
Source : Brown to Yellow = 10 ohms +/-20%

Ignition Controller Coil (CDI)

Dimensions:
Height: 41 mm
Length: 75 mm
Width: 57 mm
Fixation holes center to center: 70 mm
Wires length: 510 mm

Other specifications:
Number of plugs: 2
Number of pins: 5

Warning:

Please note that: The only real way to test your CDI box is to swap it out with another known good unit from the same year / make / model. Because of this, we recommend that you rule everything else out before replacing the CDI box.